Home |English|

Search:

 
About UsProductsQuote RequestServicesTechnical TipsContact Us

Catalog

High LIDT Laser Mirrors
Laser Antireflection Coatings
Laser Beam Splitters
Laser Edge Filters
Windows
Prisms
Lenses
Mirror Substrates
Polarizers
Infrared Optics
Welding Interference Filters
AutoDarkening Welding Helmets
Light Pipes
OLED/Sensor Glass Lids

 

Contact us
 Tel:86-21-57784688
 Fax:86-21-57784689
 
  
 

Variable Bandpass Filters

 Laser Edge Filters>>>Broad Bandpass Filters

Variable Bandpass Filters

A long pass filter and a short pass filter fastened together to create a variable bandpass filter with an bandwidth from 20nm to 100nm. The center wavelength allows to be adjusted by combining different long pass filter and short pass filters.

Specifications

Substrate material

UV Grade Fused Silica or BK7

Diameter

25.0 +0~-.025 mm

Thickness

3 ± 0.5 mm

Min. clear aperture

>85% of diameter

Transmission

>90% average within specified range

Attenuation

>99% average within specified range

Angle of incidence

0° ± 5°

Coating Technology

Electron beam evaporation, dielectric multilayers

LPF Blockings

From 80% of cut-on λ to X-ray with the O.D. of 3

SPF Blockings

From 120% of cut-off λ to 1200nm(typical) with the O.D. of 3

Surface quality

20/10 per MIL-O-13830B

Coating quality

40/20 per MIL-O-13830B

Wedge

<3 minutes

Wavefront distortion

≤1 λ @ 633nm per 25mm

Humidity resistance

Per MIL-C-675A

Abrasion resistance

Per MIL-C-675A

Optimum temperature

23°C

Temperature limits

-50°C to 100°C

Certification

Spectrophotometer print of lot sample

Cleaning

Non-abrasive method, isopropyl alcohol on lens tissue recommended

Note: Other dimension and specification are available upon request.

 Laser Edge Filters>>>Narrow Bandpass Filter

Specifications

Substrate material

UV Grade Fused Silica or BK7

Diameter

25.0 +0~-.025 mm

Thickness

3 ± 0.5 mm

Min. clear aperture

>90% of diameter

Tpeak

>35%

Attenuation

T<0.01%

Angle of incidence

0° ± 5°

Coating Technology

Electron beam evaporation, dielectric multilayers, or metal induced interference filter

Surface quality

20/10 per MIL-O-13830B

Wedge

<3 minutes

Wavefront distortion

≤1 λ @ 633nm per 25mm

Humidity resistance

Per MIL-C-675A

Abrasion resistance

Per MIL-C-675A

Optimum temperature

23°C

Temperature limits

-50°C to 100°C

Certification

Spectrophotometer print of lot sample

Cleaning

Non-abrasive method, isopropyl alcohol on lens tissue recommended

Wavelength(nm)

355, 405, 488, 514, 532, 633, 780, 850, 1064


  Copyright © 2005-2006 Amerinatech.com. All rights reservedContact us|Site map